Power supply
Reconnecting Cables to the Motherboard
FIGURE 3-14
8. Secure the cables into the cable clips (
9. If necessary, install the old NVRAM onto the new motherboard (
Refer to "Replacing the NVRAM" on page 3-11.
Note – If you have software that is licensed to the HostID or Ethernet address, you
should install the old NVRAM on the new motherboard.
J3
J11
J20
J22 (P2)
J28 (P1)
J36
J42
J45/P5
Chapter 3 Replacing the Motherboard and Associated Components
Fan tray backplane
J2
Hard drive backplane
).
FIGURE 3-14
DVD-dual drive
I/O module
P4
(not used)
).
FIGURE 3-15
3-25