Options; Ping Command; Table 9-6 Options For Ping - Sun Microsystems Ultra 25 Service Manual

The following example shows output for the netstat -p command.
# netstat -p
Net to Media Table: IPv4
Device IP Address
------ -------------------- --------------- ----- ---------------
bge0 phatair-46
bge0 ns-umpk27-02-46
bge0 moreair-46
bge0 fermpk28a-46
bge0 fermpk28as-46
bge0 kayakr
bge0 matlock
bge0 toronto2
bge0 tocknett
bge0 mpk28-lobby
bge0 efyinisedeg
bge0 froggy
bge0 d-mpk28-46-245
bge0 224.0.0.0
9.5.5

ping Command

The ping command sends ICMP ECHO_REQUEST packets to network hosts.
Depending on how the ping command is configured, the output displayed can
identify troublesome network links or nodes. The destination host is specified in the
variable hostname.
9.5.5.1

Options

TABLE 9-6
troubleshoot the Sun Ultra 45 or Ultra 25 workstation.
Options for
TABLE 9-6
Option Description
hostname The probe packet is sent to
hostname and returned.
hostname Forces the probe packet to
-g
route through a specified
gateway.
9-12 Sun Ultra 45 and Ultra 25 Workstations Service and Diagnostics Manual • May 2006
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255 SP
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
240.0.0.0
describes options for the ping command and how those options can help
ping
Mask Flags
08:00:20:92:4a:47
08:00:20:93:fb:99
08:00:20:8a:e5:03
00:00:0c:07:ac:2e
00:50:e2:61:d8:00
08:00:20:d1:83:c7
00:03:ba:27:01:48
08:00:20:b6:15:b5
08:00:20:7c:f5:94
08:00:20:a6:d5:c8
08:00:20:8d:6a:80
08:00:20:73:70:44
00:10:60:24:0e:00
SM 01:00:5e:00:00:00
How It Can Help
Verifies that a host is active on the network.
By identifying different routes to the target host, those
individual routes can be tested for quality.
Phys Addr