Table of Contents
Advertisement
A.3
Modifying Power Management
1. Open a terminal window and type the following command:
% dtpower &
The Dtpower window is displayed.
2. From the Current Power Saving Scheme pulldown menu, select Customized,
Minimal, or Standard.
If you selected Minimal or Standard, select OK.
The application exits and you are finished.
If you want to customize a minimal or standard mode, select Customized and
elect More.
The window expands. Continue with the remaining steps.
3. Select the Device Idle Time Before Power Saving Starts time.
For Example:
"15 Min" means that after 15 minutes of inactivity, all power-managed devices
will go to low-power mode. "Always On" disables power management for the
selected device.
4. Set the Override Device Idle Time for displays or drives.
5. Click OK to close the application.
A.3.1
Activating the Workstation From Low-Power
Mode
If all devices are in low-power mode, the green LED on the front panel flashes. If
any single device is powered up, the LED will stop flashing.
To reactivate the Sun Ultra 45 or Ultra 25 workstation from low-power mode, press
the spacebar on the keyboard or move the mouse. If you are connected remotely, any
system activity that you initiate can bring the workstation out of low-power mode.
Appendix A Power Management
A-3
Advertisement
Table of Contents
