Table of Contents
Advertisement
The following example shows output for the prtdiag command in verbose mode.
# /usr/platform/sun4u/sbin/prtdiag -v
System Configuration: Sun Microsystems
System clock frequency: 160 MHZ
Memory size: 1GB
. . .
============================ Environmental Status ============================
Fan Speeds:
---------------------------------------------
Location
Sensor
---------------------------------------------
F2
CPU
F1
Intake
F0
Outtake
Temperature sensors:
-----------------------------------------------------------------------------
Location
Sensor
-----------------------------------------------------------------------------
MB/0
Die
MB
Ambient
MB
Ambient
================================ HW Revisions ================================
ASIC Revisions:
-------------------------------------------------------------------
Path
-------------------------------------------------------------------
/pci@1e,600000
/pci@1f,700000
System PROM revisions:
----------------------
OBP 4.16.3 2004/11/05 18:29 Sun Ultra 45
OBDIAG 4.16.3 2004/11/05 18:31
9.5.3
prtconf Command
Similar to the show-devs command run at the ok prompt, the prtconf command
displays the devices that are configured for the Sun Ultra 45 or Ultra 25 workstation.
The prtconf command identifies hardware that is recognized by the Solaris OS. If
hardware is not suspected of being bad, yet software applications are having trouble
with the hardware, the prtconf command can indicate if the Solaris software
recognizes the hardware and if a driver for the hardware is loaded.
sun4u
Status
Speed
okay
3183rpm
okay
2280rpm
okay
2280rpm
Temperature
68C
-10C
37C
-10C
30C
-11C
Device
Status
pci108e,a801
okay
pci108e,a801
okay
Chapter 9 Solaris 10 Predictive Self-Healing and Solaris Diagnostics
Sun Ultra 45 or Ultra 25 workstation
Lo
LoWarn
HiWarn
0C
95C
0C
70C
0C
60C
Revision
4
4
Hi
Status
100C
okay
75C
okay
70C
okay
9-9
Advertisement
Table of Contents
