Table of Contents
Advertisement
9.5.3.1
Options
TABLE 9-4
help troubleshoot the Sun Ultra 45 or Ultra 25 workstation.
Options for
TABLE 9-4
Option
Description
No option
Displays the device tree of
devices recognized by the OS.
Similar to the output of no
-D
option, however the device
driver is listed.
Similar to the output of no
-p
option, yet is abbreviated.
Displays the version and date
-V
of the OpenBoot PROM
firmware.
The following example shows output for the prtconf command.
#
prtconf
System Configuration:
Memory size: 1024 Megabytes
System Peripherals (Software Nodes):
SUNW,Sun Ultra 45
. . .
9-10
Sun Ultra 45 and Ultra 25 Workstations Service and Diagnostics Manual • May 2006
describes options for the prtconf command and how those options can
prtconf
packages (driver not attached)
SUNW,builtin-drivers (driver not attached)
deblocker (driver not attached)
disk-label (driver not attached)
terminal-emulator (driver not attached)
dropins (driver not attached)
kbd-translator (driver not attached)
obp-tftp (driver not attached)
SUNW,i2c-ram-device (driver not attached)
SUNW,fru-device (driver not attached)
SUNW,asr (driver not attached)
ufs-file-system (driver not attached)
chosen (driver not attached)
openprom (driver not attached)
client-services (driver not attached)
options, instance #0
aliases (driver not attached)
How It Can Help
If a hardware device is recognized, then it is probably
functioning properly. If the message "
attached)
" is displayed for the device or for a sub-
device, then the driver for the device is corrupt or missing.
Lists the driver needed or used by the OS to enable the
device.
Reports a brief list of the devices.
Provides a quick check of firmware version.
Sun Microsystems
sun4u
(driver not
Advertisement
Table of Contents
