Installing the Power Supply
FIGURE 5-4
3. Guide the cables and push the power supply into the chassis opening until the
back of the power supply aligns with the back of the chassis.
4. Tighten the captive screw that secures the power supply to the chassis (
5. Connect the following cables (
P1 power cable on the motherboard at (J28)
P2 power cable on the motherboard (J22)
P3 hard drive backplane power cable on the hard drive backplane (J2)
P5 power supply signal cable on the motherboard (J45)
):
FIGURE 5-5
Chapter 5 Replacing Chassis Components
).
FIGURE 5-4
5-7