Table of Contents
Advertisement
# fmadm faulty
STATE
RESOURCE / UUID
-------- -------------------------------------------------------------
degraded dev:////pci@1e,600000
0ee65618-2218-4997-c0dc-b5c410ed8ec2
The PCI device is degraded and is associated with the same UUID as seen above.
You may also see "faulted" states.
9.3.2.1
fmadm config Command
The fmadm config command output shows you the version numbers of the
diagnosis engines in use by your system, as well as their current state. You can check
these versions against information on the SunSolve web site to determine if you are
running the latest diagnostic engines.
# fmadm config
MODULE
cpumem-diagnosis
cpumem-retire
eft
fmd-self-diagnosis 1.0
io-retire
syslog-msgs
9.3.3
Using the fmstat Command
The fmstat command can report statistics associated with the Solaris Fault
Manager. The fmstat command shows information about DE performance. In the
example below, the eft DE (also seen in the console output) has received an event
which it accepted. A case is "opened" for that event and a diagnosis is performed to
"solve" the cause for the failure.
VERSION
STATUS
1.5
active
1.0
active
1.13
active
active
1.0
active
1.0
active
Chapter 9 Solaris 10 Predictive Self-Healing and Solaris Diagnostics
DESCRIPTION
UltraSPARC-III/IV CPU/Memory Diagnosis
CPU/Memory Retire Agent
eft diagnosis engine
Fault Manager Self-Diagnosis
I/O Retire Agent
Syslog Messaging Agent
9-5
Advertisement
Table of Contents
