Obdiag Menu - Sun Microsystems Ultra 25 Service Manual

12.3.2

obdiag Menu

Once started, OpenBoot Diagnostics polls the system for device nodes. If the device
has a self-test, the device function can be verified. Some cards may not support self-
test. When the poll is finished, OpenBoot Diagnostics lists a menu of the tests that
can be executed. For example:
_______________________________________________________________________
|
|_______________________ _______________________ _______________________|
|
|
| 1 SUNW,XVR-100@2
| 4 serial@2,0
|_______________________|_______________________|_______________________|
| Commands: test test-all except help what setenv set-default exit
|_______________________________________________________________________|
|
| diag-passes=1 diag-level=max test-args=
|_______________________________________________________________________|
The diagnostics displayed are dynamic. If a device node is not recognized, it is not
listed in the menu. For example, if the Sun XVR-100 graphics accelerator were
removed from the system, the Sun XVR-100 graphics accelerator test would not be
available, and all remaining tests would shift location and be renumbered. For
example:
_______________________________________________________________________
|
|_______________________ _______________________ _______________________|
|
|
| 1 env-monitor@3,0
| 4 serial@2,80
|_______________________|_______________________|_______________________|
| Commands: test test-all except help what setenv set-default exit
|_______________________________________________________________________|
|
| diag-passes=1 diag-level=max test-args=
|_______________________________________________________________________|
o b d i a g
| 2 env-monitor@3,0
| 5 serial@2,80
o b d i a g
| 2 flashprom@0,0
|
| 3 flashprom@0,0
|
| 3 serial@2,0
|
Chapter 12 OpenBoot PROM
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12-7