Removing The Battery; Figure 3-6 Removing And Installing The Battery - Sun Microsystems Ultra 25 Service Manual

3.3.1

Removing the Battery

1. Power off the system and attach an antistatic wrist strap. Open and position the
chassis, and remove the access panel.
Refer to "Powering Off the Workstation" on page 2-4.
2. Release the battery by pressing the battery clip away from the battery until the
battery shifts out of the battery socket (
3. Remove the battery.
FIGURE 3-6
Note – The workstation does not function without the battery.
3-10 Sun Ultra 45 and Ultra 25 Workstations Service and Diagnostics Manual • May 2006
Removing and Installing the Battery
).
FIGURE 3-6
Battery clip