Function Keys; Table 1-1 Function Of Keys - Honeywell DC33XB User Manual

Introduction

1.3 Function Keys

Key
•
SET UP
Places the controller in the Configuration Set Up group select mode.
•
Sequentially displays Set Up groups and allows the FUNCTION key to
display individual functions in each Set Up group.
FUNCTION Used in conjunction with the SET UP key to select the individual functions of a
selected Configuration Set Up group. .
LOOP 1/2
Selects an operating parameter to be shown in the lower display.
LOWER
DISPLAY
Alternately selects AUTO or MAN.
MANUAL
AUTO
SETPOINT Hold key down to cycle through configured setpoints.
SELECT
•
RUN
Alternate action switch initiates or holds the Setpoint Ramp or Setpoint
HOLD Program.
•
Acknowledges a latched alarm 1.
Increases the selected parameter value.
Decreases the selected parameter value.
2

Table 1-1 Function of Keys

UDC3300 Basic Model: DC33XB User Manual
Function
.
12/00