Tower Conversion Kit; Installing The Tower Conversion Kit - NEC Express5800/R310g-E4 User Manual

Chapter 2 Preparations
2.3

Tower Conversion Kit

By using the tower conversion kit, you can install the server without using the dedicated rack.

2.3.1 Installing the Tower Conversion Kit

52
Be sure to observe the following precautions to use the server safety. Failure to
observe the precautions may cause death or serious injury. For details, see
Safety Precautions and Regulatory Notices.

Use only under the specified environment.

Do not connect the ground wire to a gas pipe
Be sure to observe the following precautions to use the server safely. Failure to
observe the precautions may cause burns, injury, and property damage. For
details, see Safety Precautions and Regulatory Notices.

Do not carry or install the server only by a single person.

Remove the CPU/IO module from the server before moving the server.

Do not install the server so that the load may be concentrated on a specific
point.

Do not install any components only by a single person.

Do not pull out the CPU/IO module from the rack when the tower conversion
kit is unstable.

Do not leave the CPU/IO module of the server being pulled out from tower
conversion kit.

Do not use the server while the lock of caster is released.

Do not provide the wiring for the server to exceed the rating of the power
supply.

Do not use the server in the environment where corrosive gas is generated.
Express5800/R310g-E4, R320g-E4, R320g-M4 User's Guide
W ARNING
CAUTION
2. Installation and Connection