Pulse To Tone Conversion - NEC UNIVERGE SV8100 Configuration Manual

UNIVERGE SV8100
Private Line
A Private Line is a trunk reserved for a multiline terminal for placing and answering
calls. A user with a Private Line always knows when important calls are for them.
Additionally, the user has their own trunk for placing calls that is not available to
others in the system.
Programmable Function Keys
Each multiline terminal has Programmable Function Keys that simplify placing calls,
answering calls, and using certain features. You can customize the function of a
multiline terminal programmable key from each multiline terminal. Depending on your
telephone style, you can have up to 32 Programmable Function Keys.
Programming from a Multiline Terminal
System Programming can be performed from any display multiline terminal. Most
programming changes become effective immediately. Other programming changes
become effective after the data is backed up from temporary memory to permanent
memory.

Pulse to Tone Conversion

An extension user can use Pulse to Tone Conversion on trunk calls. Pulse to Tone
Conversion lets a user change their extension dialing mode while placing a call. For
systems in a Dial Pulse area, this permits users to access dial-up Other Common
Carriers (OCCs) such as MCI from their DP area. The user can, for example:
Configuration Guide
Outgoing Prime Line Preference
Lifting the handset seizes the Prime Line. Outgoing Prime Line Preference
would help a telemarketer who always needs a free line to call prospective
clients. The telemarketer lifts the handset and the Prime Line is always
available. (Outgoing Prime Line Preference may be affected by Incoming Prime
Line Preference).
Incoming Prime Line Preference
When the Prime Line rings the extension, lifting the handset answers the call.
Incoming Prime Line Preference could benefit the Service Department
dispatcher who must quickly answer customer service calls and then dispatch
repair technicians. When a customer calls in, the dispatcher lifts the handset to
get their call. (Incoming Prime Line Preference can optionally seize an idle line
appearance.)
Place a call to an OCC over a DP trunk.
Depending on programming:
Manually implement Pulse to Tone Conversion.
- OR -
Issue 2.00
2 - 35