Chapter 1 Installing Windows
3.8
Installing Applications
Some applications included in Starter Pack can be installed easily by performing the procedures described
below. When installing these applications individually, see Chapter 2 (Installing Software). This feature is only
available on Desktop Experience.
1.
Sign-in to the Windows with an Administrators privilege.
2.
Insert the Starter Pack DVD into the optical disk drive.
3.
Run the start_up.bat under the root folder on DVD.
4.
Click Integrated Installation on the menu.
5.
On the following screen, choose the check boxes corresponding to the applications you want to install,
and then click Install. The chosen applications are automatically installed.
Tips
This function supports clean installation of applications only. If you re-install
installed application, refer to Chapter 2 (Installing Software).
Note
Applications available for installation are chosen by default.
If your system environment does not satisfy the prerequisite for an application,
you cannot install it. For details, see the on-screen information and Chapter 2
Installing Software.
To collect product information using a device information collection utility,
RESTful interface tool needs to be installed. If it is not installed, some logs
required for the maintenance may not be gathered.
Express5800/R110j-1 Installation Guide (Windows)
Installing Windows Server 2016
55