Replacing The Staple Case In The Saddle Stitcher Unit (Booklet Finisher-J1) - Canon imageRUNNER Advance C5255 Basic Operation Manual

Close the front cover of the fi nisher.
6
When closing the front cover of the fi nisher, be careful not to get your fi ngers caught, as this may
result in personal injury.
After the cover is closed, the stapler unit may automatically perform a "dry" stapling operation to reposition
the staples.
Replacing the Staple Case in the Saddle Stitcher Unit (Booklet
Finisher-J1)
When the saddle stitcher unit of the Booklet Finisher-J1 is almost out of staples and the staple case must be replaced, a screen
prompting you to replace the staple case appears on the touch panel display. Follow the procedure described below to replace the
staple case.
If necessary, remove all output paper in the booklet tray before replacing the staple cartridge of the saddle stitcher unit.
• This procedure is necessary only if the Booklet Finisher-J1 is attached (the Booklet Finisher-J1 is an optional product).
• We recommend that you order staple cases from your local authorized Canon dealer before your stock runs out.
• Use only staple cases intended for use with this machine.
• Remove the black part on the end before inserting the staple case.
90
Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012