Reception Into Memory If; If The Memory Reception Switch Is On At This Time; If The Memory Reception Switch Is Off At This Time - Brother FAX-645 Owner's Manual

Hide thumbs Also See for FAX-645:
Table of Contents

Advertisement

1
Press Menu/Set, 2, 5. The screen displays:
2
Use
or
75%. Choose 100% if you don't want a reduction.
3
Press Menu/Set when the screen displays your selection.
4
Press Stop to exit.
If you receive faxes that are split on two pages, change the reduction to AUTO
—OR—choose a lower reduction percentage.
When you use Auto Reduction to reduce incoming documents to fit on one page of
recording paper, you can do so only as long as the original document is not longer
than 35 cm. If the original is lomger than 35 cm, the data will not be reduced and
will carry over to print on a second page.
When you are Auto Reduction and you receive an incoming document that is
smaller than your recording paper, no reduction will take place, and you will get
the same size recorded as the original.

Reception into Memory if:

As soon as the paper cassette becomes empty during fax reception, the screen will
display "CHECK PAPER"; please put some paper in the paper cassette (see chap. 1).

1 1 1 1 If the MEMORY RECEPTION switch is ON at this time...

The current fax reception will continue, with the remaining page(s) being stored in
memory, subject to available memory. Subsequent incoming faxes will also be stored
into memory until the memory is full, following which no further incoming fax calls
will be automatically answered;all data will be printed as soon as fresh paper is put in
the paper cassette.

2 2 2 2 If the MEMORY RECEPTION switch is OFF at this time...

The current fax reception will continue, with the remaining page(s) being stored in
memory, subject to available memory. Subsequent incoming fax calls will not be
automatically answererd until fresh paper is put in the paper cassette. The last fax
received will be printed as soon as fresh paper is put in the cassette.
1
Press Menu/Set, 2, 6. The screen displays:
2
Use
or
3
Press Menu/Set when the screen displays your selection.
4
Press Stop to exit.
5 - 5
S E T U P R E C E I V E
to select the reduction ratio you want–AUTO, 100%, 93%, 87%, or
to select ON or OFF.
5.REDUCTION
6.MEM.RECEIVE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax-685mcMfc-960mc

Table of Contents