Brother FAX-645 Owner's Manual page 97

3
Take the used ribbon out of the cartridge:
a. Snap out the upper white spool and slide the roll off the blue gear. (Do not remove
the blue gear)
b. Lift out the lower roll.
Blue Gear
White Gear
4
Slide the white elastic off the new refill rolls and set them down with the full roll in
the lower position. (The ribbon's shiny side is facing down.)
5
Remove the white gear and spools from the ends of the used cardboard cores. Then
insert them into the same positions in the new cores.
White Gear
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
New Ribbon
Used Ribbon
Cartridge
White Spool
13 - 8