Mute; Pause; F/T (Fax/Tel) Mode; On Hook Dialling (For Fax-685Mc And Mfc-960Mc Only) - Brother FAX-645 Owner's Manual

Mute

1
Press Mute/Search to put a call on Hold.
2
You can put down the handset without disconnecting the call.
3
Pick up the machine's handset or press Speaker Phone to release the call from hold.

Pause

Press Redial/Pause to insert a pause between digits to be dialled.
If your FAX/MFC is connected to a PABX, you may need to insert an additional
number prefix (e.g."9") and a "pause" before each fax or telephone number to gain
access to the outside line. When you press Redial/Pause, a dash "_" will appear on
the display. By storing a pause, you can create a delay of 3.5 seconds.

F/T (FAX/TEL) Mode

When you share one line for your telephone and FAX/MFC, in the F/T (FAX/TEL)
mode, the FAX/MFC can determine whether an incoming call is a fax or a telephone
call. (See Select Answer Mode, page 5-1.)
On Hook Dialling
(For FAX-685MC and MFC-960MC Only)
1
Dial the number by using the dial pad or Quick-Dial keys.
2
The number you are dialling, or the name you have stored for One Touch or Speed
Dial is displayed on the LCD.
3
Press Start.
4
Pick up the handset when you hear the other end from the monitor speaker. If you press
Hook before lifting the handset, the call will be disconnected. (Only for FAX-645).
On the FAX-685MC and MFC-960MC, you can now speak to the party at the other
end without lifting the handset when you hear the other end from the speaker. Press
Speaker Phone when you finish the conversation.
A U T O M A T I C D I A L N U M B E R S A N D D I A L I N G O P T I O N S
7 - 7