Reception into memory
As soon as the paper tray becomes empty during fax reception, the
screen will display CHECK PAPER ; please put some paper in the
paper tray. (See Quick Setup Guide.)
If the Memory Receive is set to ON at this time...
If sufficient memory is available, the current fax reception will
continue. Subsequent incoming faxes will also be stored into
memory until the memory becomes full, following which no further
incoming fax calls will be answered automatically. To print all the
faxes stored in memory, insert paper into the paper tray.
If the Memory Receive is set to OFF at this time...
If sufficient memory is available, the current fax reception will
continue and remaining pages will be stored in memory, subject to
available memory. Subsequent incoming faxes will not be answered
automatically until fresh paper is put in the paper tray.
1
Menu/Set
Press
2
Use
or
Menu/Set
Press
3
Stop/Exit
Press
Receiving a fax at the end of a conversation
At the end of a conversation you can ask the other party to fax you
information before you both hang up.
1
Ask the other party to place the document in their machine and
to press the Start key. Tell the other party to wait until the fax
machine sends receiving tones (chirps) before hanging up.
2
When you hear the other machine's CNG tones (beeps), press
Fax Start
.
The LCD shows:
3
Replace the handset.
2
6
,
,
.
to select ON (or OFF ).
.
.
6.MEM.RECEIVE
RECEIVE
SETUP RECEIVE 5 - 9