Speed Dialing; Search - Brother FAX-645 Owner's Manual

Speed Dialing

1
Pick up the handset—OR—Press Hook or Speaker Phone. (See Storing Speed
Dial Numbers, page 7-2.)
2
When you hear a dial tone, press Search/Speed Dial, press #, then press the two-
digit Speed Dial number.
3
If you pressed Hook to dial the call, pick up the handset when the other party answers.
(The speaker works only one way; the other party won't be able to hear you unless you
pick up the handset.)
4
To hang up a voice call, replace the handset—OR—Press Speaker Phone.
If you are sending a fax, press Start after entering the Speed Dial number. If you
picked up the handset, press Start when the receiving FAX/MFC answers with fax
tones.

Search

You can search for names you have stored in One Touch and Speed Dial memories.
Names are shown alphabetically. (See Storing One Touch Dial Numbers, page 7-1 and
Storing Speed Dial Numbers, page 7-2.)
1
Press Search/Speed Dial, then enter the first letter of the name you're looking for.
2
Press or
3
When the screen displays the name you want to call, pick up the handset or press
Hook or Speaker Phone for a voice call.
4
Press Start to begin dialing.
5
If you pressed Hook to dial the call, pick up the handset when the other party answers.
(The speaker works only one way; the other party won't be able to hear you unless you
pick up the handset.)
6
When the call is over, hang up—OR—Press Speaker Phone to cancel the call.
A U T O M A T I C D I A L N U M B E R S A N D D I A L I N G O P T I O N S
to search the memory.
7 - 5