Changing Fax Forwarding Number
You can change the default setting of your fax forwarding number from a remote
FAX/MFC.
1
Dial your fax number.
2
When you hear the beep, immediately enter your Remote Retrieval Access Code
(1 5 9
).
3
When you hear two short beeps, enter 9 5 4.
4
Enter the new number of the remote FAX/MFC where you want your fax messages
forwarded (up to 20 digits), then press # #.
You can not use
press #. Also, if your FAX/MFC is connected to a PABX, you can press # first before
the FAX/MFC's number. The # works as well as Recall key.
5
To retrieve the Memory Status List, when you hear two short beeps, use the dial pad
to press 9 6 1.
6
Use the dial pad to enter the number of the remote FAX/MFC (up to 20 digits), and
then press # #.
7
After you hear your FAX/MFC beep, hang up and wait.Your FAX/MFC calls the
remote FAX/MFC. The remote FAX/MFC prints the Memory Status List showing the
new forwarding number.
8
Check the forwarding number.
If the forwarding number is incorrect, return to Step 1 and reset it.
8 - 5
R E M O T E F A X O P T I O N S ( F O R F A X - 6 4 5 O N L Y )
and # as dial numbers. However, if you want to store a pause,