Fax Forwarding/Paging; Programming A Fax Forwarding Number - Brother FAX-645 Owner's Manual

Fax Forwarding/Paging

When Paging is set to ON, your machine dials the pager number you have
programmed and, when connected, plays the Paging OGM that you have recorded.
This activates your pager and let you know you have a fax or voice message in the
Message Centre memory.
When Fax Forwarding is set to ON, your FAX/MFC dials the FAX/MFC phone
number you've programmed, and forwards any faxes you've received.
You can not use Paging and Fax Forwarding at the same time.

Programming a Fax Forwarding Number

1
Press Menu/Set, 8, 6.
2
Press or
3
Enter the number of the FAX/MFC where faxes
will be forwarded (up to 20 digits) and press
Menu/Set.
4
Press Stop to exit.
You can change a Fax Forwarding number remotely. (See page 9-13.)
You can not use Paging and Fax Forwarding at the same time.
M E S S A G E C E N T R E ( F O R F A X - 6 8 5 M C A N D M F C - 9 6 0 M C O N L Y )
until the LCD displays FAX FORWARD and press Menu/Set.
FWD#:
ENTER & SET
9 - 7