Table of Contents
Advertisement
Event Action
You can set up event actions to notify the event detection when the MMX detects events.
• Alarm Out: Check the box to activate alarm out.
− Schedule: Set up the period to enable alarm out. An alarm out can be activated only during this period.
− Dwell Time: Select the alarm-out dwell time. An alarm out is activated for the preset dwell time after detecting
an event.
− Name: Click the field and enter the name of alarm-out device.
− Type: Select the type of alarm-out device.
• Email: Check the box to send an email.
− SMTP Server, Port: Enter the IP address or domain name and port number of the SMTP server.
Select Use SSL/TLS if the SMTP server requires SSL (Secure Sockets Layer) authentication.
− Authentication ID, Password: Enter the ID and password if the SMTP server requires user authentication.
− Sender, Recipient: Enter a sender's and recipients' email address.
• Callback: Check the box to send a callback message to remote sites.
− Retry: Select the number of times to try sending a message if it fails to send.
− Setup: Enter the IP addresses and port numbers of the remote sites to send a message.
NOTES:
• You will need to get the IP address or domain name of the SMTP server from your network administrator.
You can use the domain name instead of the IP address if you set up the DNS server when setting up the
network.
• An email address must include the „@" character to be a valid address.
65
Advertisement
Table of Contents
