5. Connect slave MMXs to a master MMX through the DAISY CHAIN port on the rear panel.
Refer to Daisy Chain In/Out for details.
6. Connect a main monitor to a master MMX through the Main Out port. You can monitor video from any cameras
in various layouts, and sequence and event monitoring are supported. You can also control DVRs connected to
the master MMX or slave MMXs.
7. Connect quad monitors to the master MMX and slave MMXs through the Quad Out ports. You can monitor video
from the connected MMX in quad- or single-screen layout, and sequence and event monitoring are supported in
each monitor.
8