Eneo MMX Instruction Manual page 58

Quad Monitor
You can configure the screen layout and set up cameras to be displayed sequentially (sequence monitoring) or event
detected video to be displayed (event monitoring) on quad monitors connected to a master MMX and slave MMXs.
The list of quad monitors connected to a master MMX and slave MMXs is displayed, and you can change the screen
layout on each quad monitor.
• Edit: Select a quad monitor in the list and click the button. A layout setup screen appears, and a camera list of the
MMX that the quad monitor is connected is displayed in the left of the setup screen. Refer to Main Monitor –
Main Monitor Setup/Layout for details on editing the layout.
NOTES:
• The number of quad monitor layouts displayed in the list changes depending on the number of a master
MMX and slave MMXs.
• You can set up only one layout for each quad monitor. You can register only one group for either of the
sequence monitoring and event monitoring when registering a sequence or event monitoring group.
58