Eneo MMX Instruction Manual page 30

0.. G o to the following menus: Remote Setup –>
Video –> Main Monitor, Quad Monitor, Spot
Monitor
Select a monitor and click the Edit button to
set up layouts. Refer to Chapter 5 – Monitor
Layout and Control for details on setting up
the monitor layout.
. Run the INIT program and connect to the spot MMX. Check the MMX ID switch and option switch settings on the
rear panel of the spot MMX if the spot MMX is not displayed in the list.
.. Go to the following menus: Remote Setup
–> Network –> IP Address
Set up the network connection information
of a spot MMX and enter the IP address
(or name) of the master MMX that the spot
MMX is connected. The spot MMX is
registered on the master MMX.
. Run the INIT program and connect to a network keyboard.
Refer to the User's Manual of the network keyboard for details on setting up the network keyboard.
.. G o to the following menus: Remote Setup –>
Device –> General
Select Advanced from the Device type drop-down
menu.
30