Eneo MMX Instruction Manual page 40

• General Monitoring
• Sequence Monitoring
Select a camera in Camera List in the left. –>
Allocate the selected camera to the pane in the
layout with the mouse drag and drop.
NOTE: You can allocate only cameras of the MMX
Click Sequence Monitoring in Sequence & Event
Group List in the left. –> Click the Add button and
the sequence monitoring setup screen appears.
Clicking a MMX from the list in the left displays a camera list of the MMX.
–> Select a camera (max. 6) for sequence monitoring and click the
button. The selected camera is added to the sequence list in the right. –>
Adjust the sequence order by using the
sequence duration. –> Enter the group name and click the OK button.
Clicking the Sequence Monitoring in the Sequence
& Event Group List in the left displays the registered
sequence monitoring group in the list. –> Select the
group and allocate the selected group to the pane in
the layout with the mouse drag and drop.
NOTE: You cannot add an event monitoring group
40
that the quad monitors are connected.
and button and set up the
if a sequence monitoring group is already
added. Sequence monitoring and event
monitoring are not supported in a Quad
monitor at the same time.