Eneo MMX Instruction Manual page 22

8. Run the INIT program and connect to the master MMX. Refer to the INIT User's Manual for details on the
INIT program.
8.. Go to the following menus: Remote Setup
–> Network –> IP Address
Set up the network connection information
of a master MMX and slave MMXs.
The master MMX and slave MMXs' IDs set
by using the MMX ID switch on the rear panel
are displayed in the list (Master MMX ID: 0,
slave MMX ID:  to 63).
8.. Go to the following menus: Remote Setup –>
Video –> Main Monitor, Quad Monitor, Spot
Monitor
Select a monitor and click the Edit button to
set up layouts. Refer to Chapter 5 – Monitor
Layout and Control for details on setting up
the monitor layout.
9. Run the INIT program and connect to a network keyboard. Refer to the User's Manual of the network keyboard
for details on setting up the network keyboard.
9.. Go to the following menus: Remote Setup –>
Device –> General
Select Advanced from the Device type drop-down
menu.