Table of Contents
Advertisement
Video Loss
When a camera has lost video, it considers the video loss as a video loss event.
• No.: Select the desired cameras.
• Video Loss Interval: Select the video loss dwell time from the drop-down list. The MMX will not log or send
notifications of video loss events occurring during the preset interval range. You can control excessive event
logging and remote notifications of video loss events by adjusting the video loss intervals.
• Event Action: Click the field and the Event Action Setup screen appears.
Check the box for each action the MMX will take whenever it detects a video loss event.
− Alarm Out: Select to trigger an alarm-output signal.
− Send Email: Select to send an Email.
− Remote Callback: Select to send a message to remote sites and select the desired remote sites.
− PTZ Preset: Click the desired PTZ camera and select the desired preset number to move a PTZ camera to the
previously saved preset location. You must set up preset locations of PTZ cameras during the PTZ setup on the
DVR or by using the network keyboard.
NOTE: You must properly configure the settings related to each event action during the 5.4 Event – Event
Action setup to enable event actions.
64
Advertisement
Table of Contents
