Eneo MMX Instruction Manual page 21

5. Connect a main monitor to a master MMX through the Main Out port. You can monitor video from any cameras
in various layouts, and sequence and event monitoring are supported. You can also control DVRs connected to
the master MMX or slave MMXs.
6. Connect quad monitors or spot monitors to the master MMX and slave MMXs through the Quad Out or Spot Out
ports. You can monitor video from the connected MMX in quad- or single-screen layout, and sequence and event
monitoring are supported in each monitor.
7. Connect MMXs to network via Ethernet connections through the NETWORK port on the rear panel.
All MMXs should be networked via Ethernet.