Table of Contents
Advertisement
6.1 System
General
Master MMX and Slave MMXs
The list of a master MMX and slave MMXs daisy-chained to the master MMX is displayed. You can name the MMXs
individually, and the other settings are applied to the master MMX and slave MMXs equally.
• MMX ID, Version: Displays the device's ID and software version.
• Name: Enter the device's name (up to 3 characters including spaces).
• Language: Select the language to be used during the remote setup.
• Setup
− Load Default: Click to return all except network related settings to the original factory settings.
− Import: Click to apply the settings saved as a .mda file format to a master MMX and all slave MMXs daisy-
chained to the master MMX at once. A setup screen appears allowing you to select the setup file. You can select
whether or not network settings (IP address, port number, DVRNS) will be included when the setup is applied.
− Export: Click to save the current settings of the master MMX and all slave MMXs daisy-chained to the master
MMX as a .mda file format at once. A setup screen appears allowing you to name the setup file.
NOTE: You cannot import saved MMX settings when the number of currently installed MMXs is different from
the number of MMXs in the saved MMX settings.
You can change a device's system information, import or export all settings, and
add users or groups
48
Advertisement
Table of Contents
