Eneo MMX Instruction Manual page 20

3. Set up the MMX ID and options by using the MMX ID switch and option switch on the rear panel of the MMX.
Refer to MMX ID Switch and Option Switch for details.
[Master MMX] Set up the MMX ID to „0" and the MASTER MODE switch to the On position.
[Slave MMX] Set up the unique MMX ID for each slave MMX from „" to „63" in order and set the END OF
SLAVES switch to the On or Off position depending on the slave MMXs' ID setting. Set the END OF SLAVES
switch of the slave MMX with the highest ID number to the On position and the other to the Off position.
4. Connect slave MMXs to a master MMX through the DAISY CHAIN port on the rear panel.
Refer to Daisy Chain In/Out for details.
ID MMX ID Switch
0
Option Switch
ID MMX ID Switch

Option Switch
0