Eneo MMX Instruction Manual page 41

• Event Monitoring
4. Video from selected channels is displayed on the quad monitor in the user-defined layout.
Click Event Monitoring in Sequence & Event
Group List in the left. –> Click the Add button and
the event monitoring setup screen is displayed.
The camera list of the MMX is displayed in the left. –> Select a camera
for event monitoring. –> Select event types and set up the display
duration of event detected video. –> Enter the group name and click the
OK button.
Clicking the Event Monitoring in the Sequence &
Event Group List in the left displays the registered
event monitoring group in the list. –> Select the
group and allocate the selected group to the pane in
the layout with the mouse drag and drop.
NOTE: You cannot add a sequence monitoring
4
group if a sequence monitoring group is
already added. Sequence monitoring and
event monitoring are not supported in a
Quad monitor at the same time.