Eneo MMX Instruction Manual page 45

Monitoring Video on Spot MMX Monitor
You can change the channel for monitoring on the spot MMX monitor by using a network keyboard.
. Press the spot MMX monitor's ID by using the network keyboard. You can check the spot
MMX monitor's ID by running the INIT program and connecting the network keyboard
(Remote Setup –> Device –> Setup –> Matrix –> [ID] Spot MMX Monitor).
. Press the
3. Press the camera ID. You can check the camera ID by running the INIT program and
connecting to the network keyboard (Remote Setup –> Device –> Setup –> Matrix –>
[ID] 'Camera name').
4. Press the
button.
button. Video from the camera is displayed in the spot MMX monitor.
45