Table of Contents
Advertisement
9.6. Go to the following menus: Remote Setup –>
Device –> Setup
Click Matrix in the device list and the Scan or Add
button to register the master MMX.
9.7. Set up the registration information and click the OK button.
• I D: The network keyboard assigns the ID automatically when the
MMX is registered, and you can change the ID. The ID will be used
to distinguish the MMX from other devices when controlling the
MMX by using a network keyboard, so each device should have its
own unique ID.
• Spot Monitor: Select to control spot monitors connected to the
master MMX and slave MMXs.
• S lave MMX: Select the number of slave MMXs daisy-chained to the
master MMX. The slave MMXs are registered on the network
keyboard automatically when the master MMX is registered.
• I P Address, Control Port, User ID, Password: Enter the IP address,
port number, user ID and password for the connection to the MMX.
9.8. Click the Matrix pull-down menu in the device
list, then the registered MMX's pull-down menu.
A list of monitors and cameras supported in the
MMXs is displayed.
[ID] Main Monitor: Displays the monitor ID
•
and type.
•
[ID] Spot Monitor No.: Displays the monitor
ID, monitor type and the Spot Out number of the
MMX or slave MMXs.
•
[ID] „Camera Name": Displays the ID and
name of the camera.
9.9. Click a camera in the list and the Edit button. Set up the camera
information.
• I D: Set up the camera ID. The MMX's camera ID should be the same
as the camera ID of the DVR connected to the MMX. Otherwise, two
different IDs will be assigned to one camera. When clicking the OK
button displays a message box to confirm using the existing ID. Click
the OK button to complete the changes. The ID will be used to distin-
guish the camera from other cameras when controlling it by using a
network keyboard, so each camera should have its own unique ID.
• Type: Set up the camera type.
− Device Output: Select if the Main Out of the DVR is connected
to the Video In port of the MMX, and select the DVR.
You can control the DVR by using a network keyboard.
4
Advertisement
Table of Contents
