Spot Mmx Monitor - Eneo MMX Instruction Manual

3. Press the DVR ID. You can check the DVR ID by running the INIT program and connecting
the network keyboard (Remote Setup –> Device –> Setup –> Digital Video Recorder
4. P ress the
5. Press the camera number of the DVR.
6. P ress the

5.4 Spot MMX Monitor

A spot MMX monitor is connected to a spot MMX. You can monitor video from a master MMX or slave MMXs
connected to the spot MMX and control DVRs on the spot MMX monitors by using a network keyboard.
NOTE: You can change the layout on the spot MMX monitor only by using a network keyboard.
Controlling Spot MMX Monitor Display
You can change the channel to monitor on the spot MMX monitor or control DVRs connected to MMXs by using a
network keyboard. Refer to the User's Manual of the network keyboard for details on control by the network keyboard.
–> [ID] 'DVR name').
button. The DVR's main monitor screen is displayed in the spot monitor,
and you can control the DVR by using device control buttons.
button. Video from the camera is displayed in the spot monitor, and you
can control the camera by using PTZ control buttons if the camera is a PTZ camera.
44