Table of Contents
Advertisement
Spot MMXs
The settings of a master MMX and slave MMXs are not applied to spot MMXs, and you can change the spot MMX's
setting separately. Run the INIT program and connect to a spot MMX and change the settings.
Date/Time
• Date/Time: Change the system date/time, date/time format and time zone, and turn daylight saving time on or off
by checking the box. Clicking the Apply button applies the changes immediately.
• Time Sync − Automatic Sync: Check the box to automatically synchronize the time with a time server.
Enter the IP address or the domain name of the time server and set the time interval for synchronization.
NOTE: You can use the domain name instead of the IP address of the time server during the Time Sync
setting if you set up the DNS Server when setting up network.
49
Advertisement
Table of Contents
