Controlling Cameras on Spot Monitor
You can change the channel for monitoring on the spot monitor by using a network keyboard.
. P ress the spot monitor's ID by using the network keyboard. You can check the spot
monitor's ID by running the INIT program and connecting the network keyboard
(Remote Setup –> Device –> Setup –> Matrix –> [ID] Spot Monitor).
. Press the
3. Press the camera ID. You can check the camera ID by running the INIT program and
connecting to the network keyboard (Remote Setup –> Device –> Setup –> Matrix –>
[ID] 'Camera name').
4. P ress the
you can control the camera by using PTZ control buttons if the camera is a PTZcamera.
Controlling DVRs on Spot Monitor
You can control DVRs connected to MMXs on the spot monitor by using a network keyboard.
. P ress the spot monitor's ID by using the network keyboard. You can check the spot
monitor's ID by running the INIT program and connecting the network keyboard
(Remote Setup –> Device –> Setup –> Matrix –> [ID] Spot Monitor).
. Press the
button.
button. Video from the camera is displayed in the spot monitor, a nd
button.
43