Eneo MMX Instruction Manual page 37

. Press the main monitor ID by using the network keyboard. You can check the main monitor
ID by running the INIT program and connecting to the network keyboard (Remote Setup
–> Device –> Setup –> Matrix –> [ID] Main Monitor).
. Press the
3. Press the layout number of the main monitor. You can check the layout number by running
the INIT program and connecting to the MMX (Remote Setup –> Video –> Main Monitor)
(eg. Layout 1 (3+4)).
4. Press the
Controlling Cameras on Main Monitor
You can monitor video from a channel and control a camera in the desired pane of the main monitor by using a
network keyboard.
. Press the main monitor ID by using the network keyboard. You can check the main monitor
ID by running the INIT program and connecting to the network keyboard (Remote Setup
–> Device –> Setup –> Matrix –> [ID] Main Monitor).
. Press the
3. Press the pane number.
4. Press the
5. Press the camera ID.
6. Press the
you can control the camera by using PTZ control buttons if the camera is a PTZ camera.
button.
(Display) button. The layout changes.
button.
button.
button. Video from the camera is displayed in the selected pane, and
37