Monitor Layout And Control; Main Monitor - Eneo MMX Instruction Manual

• Type: Set up the camera type.
− Device Output: Select if the Main Out of the DVR is connected
to the Video In port of the MMX, and select the DVR.
You can control the DVR by using a network keyboard.
− Fixed: Select if the camera is not a PTZ camera.
– PTZ Camera: Select if the camera is a PTZ camera, and select
the device that controls the PTZ camera. You can control the
PTZ camera by using a network keyboard.

5. Monitor Layout and Control

You can create various monitor layouts with user-defined channels during the MMX setup. You can also monitor video
from any camera channels and control the DVRs or PTZ cameras on the monitor by using a network keyboard.
The MMX should be registered on the network keyboard properly to control the MMX.
Refer to the User's Manual of the network keyboard for details on the MMX control by a network keyboard.

5.1 Main Monitor

A main monitor is connected to a master MMX and controlled by a network keyboard. You can monitor video from
any cameras in the preset layout in the main monitor or change the layout by using a network keyboard. Sequence
monitoring and event monitoring are supported according to the preset settings. You can also control DVRs by using a
network keyboard.
33
Event Monitoring
Sequence Monitoring