Eneo MMX Instruction Manual page 34

NOTES: Sequence monitoring allows you to monitor video from user-defined camera channels sequentially.
Camera channels and the sequencing interval should be preset for sequence monitoring. Refer to
Configuring Main Monitor Layout for details of setting up sequence monitoring. Event monitoring
allows you to monitor event detected video when the user-defined events occur at the user-defined
camera channels. Camera channels and event types should be preset for event monitoring. Refer
to Configuring Main Monitor Layout for details of setting up event monitoring. The number of MMXs
will be displayed at the bottom right corner on the monitor. ('the number of properly operating MMXs
among the daisy-chained MMXs' / 'the number of networked MMXs among the daisy-chained
MMXs' / 'the total number of daisy-chained MMXs')
Configuring Main Monitor Layout
. Run the INIT program and connect to the master MMX.
Refer to the INIT User's Manual for details on the INIT program.
. Go to the following menus: Remote Setup –> Video –> Main Monitor
Saved layouts are displayed in the list. Click the
Add button to add a new layout (max. 9) and the
Edit button to edit the saved layout. Selecting a
layout and clicking the Set Default button sets
the selected layout as a default layout, and „(*)" is
displayed in front of the default layout in the layout
list. When monitoring video in the main monitor,
video is displayed in the preset default layout and
you can load any layout from the layout list by using
a network keyboard.
NOTE: The layout number and screen division
mode is displayed with the layout name
in the layout list. For example, Layout 1
(1+7) indicates the layout „1" in the
„1+7" screen division mode named as
Layout.
3. Click the Add button and the main monitor setup screen appears. Select the desired layout from the Layout
drop-down menu at the upper right corner of the layout setup screen. Select the camera in Camera List or
group in Sequence & Event Group List in the left and allocate the camera or group to the desired pane in the
layout.
• General Monitoring
Select a camera in Camera List in the left. –>
Allocate the selected camera to the pane in the
layout with the mouse drag and drop.
34