Verifying The Hardware Installation - Cisco WAP200 Administration Manual

Installing the Access Point

Verifying the Hardware Installation

Verifying the Hardware Installation
NOTE
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the LED states. See
If you need help resolving a problem, visit the Cisco Small Business Support
Community at www.cisco.com/go/smallbizsupport. For technical documentation
and other links, see Appendix D, "Where to Go From Here."
Chapter 3, "Product Overview."
4
14