Verifying the Hardware Installation
5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
Label
Activity
Power
Off
Solid (Green)
Solid (Blue)
Flashing (Blue)
Solid (Red)
If you need help resolving a problem, visit the Cisco Support
N
OTE
Community at www.cisco.com/go/smallbizsupport.
9
Description
The WAP571E is out of power.
The Cisco WAP571E is normal; no wireless
client connected.
The Cisco WAP571E is normal; at least one
wireless client connected.
The Cisco WAP571E is upgrading the
firmware.
The Cisco WAP571E fails to boot with both
firmware images.
Cisco WAP571E Wireless Access Point