Configuring the WAP200 Access Point
Using Windows Help Menus
Using Windows Help Menus
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster
This wireless product requires Microsoft Windows. Product features can be
accessed through Windows Help and are described in the following sections:
•
TCP/IP, page 74
•
Shared Resources, page 74
•
Network Neighborhood/My Network Places, page 74
TCP/IP
Before a computer can communicate with the access point, TCP/IP must be
enabled. TCP/IP is a set of instructions, or protocol, all computers follow to
communicate over a network. This is true for wireless networks as well. Your
computers will not be able to utilize wireless networking without having TCP/IP
enabled. Windows Help provides complete instructions on enabling TCP/IP.
Shared Resources
If you wish to share printers, folder, or files over your network, Windows Help
provides complete instructions on utilizing shared resources.
Network Neighborhood/My Network Places
Other computers on your network will appear under Network Neighborhood or My
Network Places (depending upon the version of Windows you're running).
Windows Help provides complete instructions on adding computers to your
network.
6
74