Verifying The Hardware Installation - Cisco WAP361 Quick Start Manual

Verifying the Hardware Installation

5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator light.
Label Activity
Off
Power
Solid Green
Solid Blue
Solid Red
Flashing Green
Flashing Blue
Off
LAN0-4
Solid Green
Solid Amber
Flashing
If you need help resolving a problem, visit the Cisco Support
N
OTE
Community at www.cisco.com/go/smallbizsupport.
Cisco WAP361 Quick Start Guide
Description
The WAP361 is out of power.
The Cisco WAP361 is normal; no wireless
client connected.
The Cisco WAP361 is normal; at least one
wireless client connected.
The Cisco WAP361 fails to boot with both
firmware images.
The Cisco WAP361 is booting.
Firmware upgrade is in progress.
No Ethernet link.
Gigabit Ethernet link is active.
Fast Ethernet link is active.
Transmitting or receiving data.
9