Table of Contents
Advertisement
Configuring the WAP200 Access Point
Configuring Wireless Settings
STEP 5
STEP 6
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster
Provide the following information:
•
RADIUS Server IP Address—Enter the RADIUS server's IP address.
•
RADIUS Server Port—Enter the port number used by the RADIUS server.
The default is 1812.
•
Encryption—Mixed Mode automatically chooses TKIP or AES for data
encryption.
•
Shared Secret—Enter the shared secret key used by the access point and
RADIUS server.
•
Key Renewal Timeout—Enter a key renewal timeout period, which instructs
the access point how often it should change the encryption keys. The default
is 3600 seconds.
Click Save.
6
38
Hide quick links:
Advertisement
Table of Contents
