Verifying The Hardware Installation - Cisco WAP131 Quick Start Manual

Verifying the Hardware Installation

5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
Label Activity
Off
POWER
Solid Green
Solid Blue
Solid Amber
Solid Red
Flashing
WLAN Off
Solid Green
Solid Amber
Solid Blue
Flashing
LAN Off
Solid Green
Solid Amber
Flashing
If you need help resolving a problem, visit the Cisco Small Business
N
OTE
Support Community at www.cisco.com/go/smallbizsupport.
Cisco WAP131 Quick Start Guide
Description
The Cisco WAP131 has no power.
The Cisco WAP131 is powered on, booting, or in
normal operation with DC power supply.
The Cisco WAP131 is powered on, booting, or in
normal operation with PoE 802.at power supply.
The Cisco WAP131 is powered on, booting, or in
normal operation with PoE 802.af power supply.
The Cisco WAP131 fails to boot with both
firmware images.
The Cisco WAP131 is upgrading the firmware,
or is acquiring an IPv4 or IPv6 address.
Wireless is disabled, for both 2.4 GHz and 5
GHz.
Wireless is enabled in concurrent mode. (The
intensity needs to be the same)
Wireless is enabled with only 5 GHz in use.
Wireless is enabled with only 2.4 GHz in use.
Transmitting or receiving data.
No Ethernet link.
GE Ethernet link is active.
FE Ethernet link is active.
Transmitting or receiving data.
5