Connecting The Equipment; Using A Poe Switch To Connect The Wap200 To The Network - Cisco WAP200 Administration Manual

Installing the Access Point

Connecting the Equipment

Connecting the Equipment
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster
You can connect the WAP200 access point to your network in one of the following
ways:
• Using a PoE switch
• Using a standard switch

Using a PoE Switch to Connect the WAP200 to the Network

To connect the WAP200 access point to your network using a PoE switch, simply
connect the Ethernet port of the access point to an Ethernet port on the PoE
switch.
The LEDs on the front panel light up when the WAP200 access point powers on.
4
12