Verifying The Hardware Installation - Cisco WAP121 Quick Start Manual

Verifying the Hardware Installation

5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
Label Activity
Power Off
Solid Green
Solid Amber
Flashing
Off
WLAN
Solid Green
Solid Amber
Flashing
Flashing Fast (2x
Flashing rate)
Off
LAN
Solid Green
Solid Amber
Flashing
If you need help resolving a problem, visit the Cisco Support
N
OTE
Community at www.cisco.com/go/smallbizsupport.
6
Description
Power is off
Power is on. Normal operation using an
external power adaptor.
Power is on. Normal operation using PoE.
Booting/Firmware upgrade
Wireless is disabled, for both 2.4 GHz and
5 GHz wireless networks
Wireless 2.4 GHz band is enabled.
Wireless 5 GHz band is enabled.
Transmitting/Receiving Data
Wi-Fi Protected Setup (WPS) is synchronizing
No Ethernet Link
Ethernet link is active.
• FE link is detected for Cisco WAP121
• GE link is detected for Cisco WAP321
Ethernet link is active.
• FE link is detected for Cisco WAP321
Transmitting/Receiving Data
Cisco WAP121 and WAP321 Wireless-N Access Points