Setting Up Your Access Point; Configuring Basic Setup Settings - Cisco WAP200 Administration Manual

Configuring the WAP200 Access Point

Setting Up Your Access Point

Setting Up Your Access Point
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster
This section describes how to configure the general settings of the access point:
• Configuring Basic Setup Settings, page 20
• Configuring Time Settings, page 23

Configuring Basic Setup Settings

The Setup > Basic Setup window displays the general settings of the access
point.
You can configure the following basic setup settings:
• Configuring Basic Setup Settings, page 21
• Configuring Network Setup Settings, page 22
6
20