Checking Wireless Status - Cisco WAP200 Administration Manual

Configuring the WAP200 Access Point
Verifying Access Point Status
STEP 1
STEP 2
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster

Checking Wireless Status

The Status > Wireless window displays the access point's current status
information for the wireless networks.
To check the wireless network status of the access point, follow these steps:
Click Status > Wireless.
This page displays the status of the wireless network:
• Mode—Access point's wireless network mode.
• Channel—Access point's channel setting for the SSID.
• Bandwidth Utilization—Percentage of the bandwidth being used.
• VLAN Trunk—VLAN Trunk status.
• Priority Setting—Priority setting status.
• SSID 1–4—Information about the access point's SSIDs that have been
configured.
To update the status information, click Refresh.
6
71